Originally Posted by CooperMan
Originally Posted by Taffmog
If you can get hold of some Belzona Molecular I'm sure that will work, sort of a JB weld but far better and horrendously expensive!

https://www.belzona.com/en/products/1000/1111.aspx

Sounds impressive stuff, thanks for the tip off Taffmog

I recall Belzona molecular metal being used to repair the tanks on oil filled power transformers when I was a young engineer in the power supply industry back in the ‘70s. The fact that it could withstand both oil and constant vibration from a.c. current, was impressive. So I used it to seal a leak in the seam of my Matchless G12 petrol tank which had rusted and split open; and it never leaked again.

Doug
2011 Plus 4 in Rich Maroon

1972 750 “ComDom” sprinter
1958 Triton 650
1992 Triumph Trophy 900