Talk Morgan Forums Community The Malvern Arms Spitfire Project-Aluminium model-Shameless plug.

Hey Guys

I'm here to shamelessly plug my next venture !!

As some here will know, I like to make things I've posted a few projects here before and had a great reception for them.

So for a long while Ive been wanting to make a decent representation of a Spitfire. Searching the internet, there are model Spitfires from the usual model makers etc and some larger ones from mass produced Asian market.
What I cant find is a faithful representation, they all seem to be either badly cast or stamped plate which bear little resemblance to the real thing.

I wanted an all metal version of large size for desk or office. The model I will hopefully be making has a 395mm wing span is around 320mm long so is a decent size.

I set the wheels in motion and have had a CAD file made up ready for CNC manufacture and subsequently gathered quotes. As you may well know, CNC manufacture is hellish expensive so to make it viable I will need at least ten definite names!

This where you come in Obviously this is a plug of my wares and you may have zero interest, but if you think you may be interested, then please head over to www.gasgasbones.com and have a gander at the blurb and initial renders.

As always, big thanks to Simon for permission to post up my projects etc

And thank you for reading.

Bonio