Everything James said. Can you repair the answer is no when you put the headlamp back in the void carefully putting the lugs down the sliders and you fit the metal cradle support the tension nut will be overtightened for adgustement and over time will re open the crack or seal. However you can repair the lugs with a self tapper place a quarter of an inch of old biro over the screw a fill with Jb weld or similar a small bit of fileing is required. Always cable tie the support assembly to the car nothing holds it in except the lugs about 200 sterling if you loose it. Good luck with the adgustement pulling the wings and bonnet off for a service is a doddle adgusting the headlight without tension is a pisser. Em
- couldn't have put it better Em.
James
