Greetings, all. After the chassis cracked a number of years ago it was replaced and rebuilt. The cable from the right front wheel had to be restrung and, in so doing, a plug was inserted into the circuit for ease of removing in the future. That failed as it received the full brunt of wind and weather causing the wires to break and fail. Does any one have an idea as to what goes where? What color feeds from the body harness go to what color wires from the wheel?
Once I have that information I'm going to solder all the wires together and fully insulate them as well as snugging it all down so it doesn't get clobbered in the future. This has happened before and it is a point of failure.
Thanks to all. This site has saved my sorry ass oh so many times...
