Originally Posted by DaveW
We do need experts around the place...................
rofl rofl rofl



Originally Posted by Deejay
Originally Posted by Rog
Originally Posted by Zach
Rog mentioned in his comment on this thread that the BCU pins can get mucky or corroded. My thought was that if on this vehicle the BCU is one of the units with a terminating resistor, bad pin connection might lead to a bus term missing or high value and hence as you say due to reflections data corruption to the instruments.

Hi Tony, yes exactly smile

Here's one of my terminators (R30) next to the CAN chip on my MFU. Most likely the GDI's BCU will be similar. The connectors on mine are not what you would particularly class as, ruggedized.

[Linked Image]
I never knew that a 2011 plus 4 ran a CANBUS system. I always thought that it only appeared with GDI models. So where is this gubbins located?

Hi Doug,

Anything with a MFU has a simple CAN.

IC5 is a TJA1050T

[Linked Image]

Roger
2011 Plus 4