|
Forums34
Topics48,363
Posts813,333
Members9,215
| |
Most Online1,046
Aug 24th, 2023
|
|
|
There are no members with birthdays on this day. |
|
|
|
Joined: Aug 2013
Posts: 40
Just Getting Started
|
Just Getting Started
Joined: Aug 2013
Posts: 40 |
Mike, I sent you a message. There you can find the details for the LHD Morgan.
Christian
4/4 sports grey
|
|
|
|
|
Joined: Aug 2013
Posts: 40
Just Getting Started
|
|
Just Getting Started
Joined: Aug 2013
Posts: 40 |
Hi Mike, I sent you a message with some details.
Christian
4/4 sports grey
|
|
|
|
|
Joined: Mar 2012
Posts: 37
Just Getting Started
|
|
Just Getting Started
Joined: Mar 2012
Posts: 37 |
4/4 Sport 2011 sport sand
|
|
|
|
|
Joined: Sep 2013
Posts: 158
L - Learner Plates On
|
|
L - Learner Plates On
Joined: Sep 2013
Posts: 158 |
Hi Blondy,
I have a 2012 4/4 1.6l . My K&N filter is KN33-2877 The set up on my 2009 4/4 is somewhat different but I got some great pointers from Cain and installed the K&N air filter he referenced. I also made up a 'ram air system' with a tube connected to the bottom of the air filter box collector, and exiting under the radiator at the front of the car with an air scoop from 'Demon Tweaks'. Air filter €30, tube €5 and air scoop €10 (I think). I think it made a lot of difference to performance of the standard 1.6. More torque, more response in take-off and higher gears - Very cheap horse power upgrade fix. I don't like the air entry scoop look and position up the front (as it could get snagged on any (very) rough ground but I could not feed it into the area in front of the grill as it seems to be a sealed unit on the 09 model. Still happy (thanks Cain!). I would put up picture but I still have not worked out how to do it without screwing it up! Any advice and I will post some pictures. Regards G
Silver 4/4
|
|
|
|
|
Joined: Jan 2007
Posts: 3,425 Likes: 26
Talk Morgan Addict
|
|
Talk Morgan Addict
Joined: Jan 2007
Posts: 3,425 Likes: 26 |
Garret
Send the pic to my e-mail address rsyme@eircom.net and I'll post it for you
Cheers!
Robbie
2021 Plus Four -- Helga
211-WX-1433
"Fettlebodge"--A chief of the PaddyMogs
|
|
|
|
|
Joined: Sep 2013
Posts: 158
L - Learner Plates On
|
|
L - Learner Plates On
Joined: Sep 2013
Posts: 158 |
Garret
Send the pic to my e-mail address rsyme@eircom.net and I'll post it for you
Cheers! Will do Robbie. I will get the camera to it tomorrow Regards. G
Silver 4/4
|
|
|
|
|
Joined: Jan 2007
Posts: 3,425 Likes: 26
Talk Morgan Addict
|
|
Talk Morgan Addict
Joined: Jan 2007
Posts: 3,425 Likes: 26 |
Cain sent me some snaps which I will ask him if I can post too!
Robbie
2021 Plus Four -- Helga
211-WX-1433
"Fettlebodge"--A chief of the PaddyMogs
|
|
|
|
|
Joined: Jul 2011
Posts: 59
Just Getting Started
|
|
Just Getting Started
Joined: Jul 2011
Posts: 59 |
Mike, I sent you a message. There you can find the details for the LHD Morgan. hello, would you please copy/paste that message to me as well? Many thanks,
Alberto
Milano, Italia
___________
4/4 Sport
Sport green
|
|
|
|
|
Joined: Dec 2011
Posts: 486
Learner Plates Off!
|
|
Learner Plates Off!
Joined: Dec 2011
Posts: 486 |
Please do I never seem to be able to!
I was very pleased with the results and it works very well on my Morgan 4/4 Sport and have been running like this for 3 years approximately 29,000 miles. The bracket is new as I've only just made it, before this the intake was zip tied to the grill.
Recently I increased the size of the Cold air intake pipe from the 55mm standard to 76mm would not recommended as there is a drop in BHP on the dyno but an increase in torque, fuelling was ok at top end but she felt sluggish on the road. So this is work in progress...
Cain
Cain
Wolf Cafe Racer
4/4 Sport
|
|
|
|
|
Joined: Sep 2013
Posts: 158
L - Learner Plates On
|
|
L - Learner Plates On
Joined: Sep 2013
Posts: 158 |
Folks
I sent pics on to Robbie. I am going to try to move the air scoop from the radiator grill to the grill as Cain has done as I am worried it may snag some time (although it is still higher than the bottom of the sump.
G
Silver 4/4
|
|
|
|
|
