Whilst preparing my 2006 aero 8 Mk3 for MOT/Service I removed the grill and to my surprise, the quality of manufacture is far superior to the grill fitted to the plus 8. I have attached a few pictures and wondered if the same quality had been carried over to the later aero 8s/SS/Coupe.
I agree.....the grill is ok-ish...shame the welds were not polished a bit! The mesh is poor. It should ideally have a circumference with an edging piece all round, made of the same gauge wire. Those protruding bits are terrible, for a premium car especially.
I agree.....the grill is ok-ish...shame the welds were not polished a bit! The mesh is poor. It should ideally have a circumference with an edging piece all round, made of the same gauge wire. Those protruding bits are terrible, for a premium car especially.
Sorry Jays and Sospan have to disagree the welds in this state will rust up quite quickly. Would not de surprised if standard steel was used to weld with instead of stainless. Not great workmanship IMHO.
Adrian
Buggered Off, to a modern none leaky car, heart's still ticking