|
|
|
Forums34
Topics48,349
Posts813,090
Members9,212
| |
Most Online1,046
Aug 24th, 2023
|
|
|
|
Joined: May 2012
Posts: 1,789 Likes: 3
Talk Morgan Enthusiast
|
Talk Morgan Enthusiast
Joined: May 2012
Posts: 1,789 Likes: 3 |
Wrap some masking tape around the cutter so it is a nice sliding fit then give the extension a tap with a hammer to centre punch the baffle.
Remove the tape and resharpen the pilot drill then off you go.
|
|
|
|
|
Joined: Feb 2019
Posts: 3,854 Likes: 2
Talk Morgan Addict
|
|
Talk Morgan Addict
Joined: Feb 2019
Posts: 3,854 Likes: 2 |
The light at the end of the tunnel is actually a train. 2019 M3W
|
|
|
|
|
Joined: Dec 2017
Posts: 2,041 Likes: 71
Talk Morgan Expert
|
|
Talk Morgan Expert
Joined: Dec 2017
Posts: 2,041 Likes: 71 |
I found the drill bit awkward to use and it was much easier to remove it just using the cutter with WD40 as a lubricant, applying light pressure to start the cut then letting the cutter do its business. I didn't need to wrap the cutter as 38mm was the size of the baffle and the cutter without the drill bit cuts it directly without any movement.
Bruce
1964 4/4 Series V Comp (Megan)
1994 +8 (Maurice)
2013 M3W (Olga)
|
|
|
|
|
|
|
