|
8 members (MJF, High Hamster, CLPlusFour, Arwyn Williams, RedThree, MartinB60, A11OGE, BobtheTrain),
287
guests, and
41
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums34
Topics48,362
Posts813,320
Members9,215
| |
Most Online1,046
Aug 24th, 2023
|
|
|
There are no members with birthdays on this day. |
|
|
|
Joined: Oct 2012
Posts: 2,776 Likes: 59
Talk Morgan Expert
|
Talk Morgan Expert
Joined: Oct 2012
Posts: 2,776 Likes: 59 |
The rear spindle nut needs to be very tight, in the order of 160lbft tight. It's only the friction that the tension in the spindle creates that stops the spindle moving out of alignment. The adjuster screws and bars play no meaningful part in holding things in place against the forces generated between the drive belt and the tyre contact point; they bend really easily.if the nut isn't tight enough.
I'll stand by my description of the correct way to do up the spindle as "effing tight, then tighten till you can get the pin through the castellations."
|
|
|
|
|
Joined: Mar 2011
Posts: 360 Likes: 8
Learner Plates Off!
|
Learner Plates Off!
Joined: Mar 2011
Posts: 360 Likes: 8 |
How on earth does a brand new M3W leave the factory and the dealer with the belt loose enough to be moved down by 2 inches ???!!
|
|
|
|
|
Joined: Jan 2021
Posts: 70
Just Getting Started
|
|
OP
Just Getting Started
Joined: Jan 2021
Posts: 70 |
The rear spindle nut needs to be very tight, in the order of 160lbft tight. It's only the friction that the tension in the spindle creates that stops the spindle moving out of alignment. The adjuster screws and bars play no meaningful part in holding things in place against the forces generated between the drive belt and the tyre contact point; they bend really easily.if the nut isn't tight enough.
I'll stand by my description of the correct way to do up the spindle as "effing tight, then tighten till you can get the pin through the castellations." Good approach  Those adjustment screws are clearly there to help space and angle it with the spindle loose, they’re nowhere near strong enough to support everything safely.
|
|
|
|
|
Joined: Jan 2021
Posts: 70
Just Getting Started
|
|
OP
Just Getting Started
Joined: Jan 2021
Posts: 70 |
How on earth does a brand new M3W leave the factory and the dealer with the belt loose enough to be moved down by 2 inches ???!! Several possibilities: 1. Lunch 2. Pretty girl walking past 3. It’s 4:30pm
|
|
|
|
|
Joined: Feb 2019
Posts: 3,854 Likes: 2
Talk Morgan Addict
|
|
Talk Morgan Addict
Joined: Feb 2019
Posts: 3,854 Likes: 2 |
How on earth does a brand new M3W leave the factory and the dealer with the belt loose enough to be moved down by 2 inches ???!! Quality control is put far behind in the order of priority. Money is heading the list with QC last on the list.
The light at the end of the tunnel is actually a train. 2019 M3W
|
|
|
|
|
Joined: Feb 2019
Posts: 3,854 Likes: 2
Talk Morgan Addict
|
|
Talk Morgan Addict
Joined: Feb 2019
Posts: 3,854 Likes: 2 |
The rear spindle nut needs to be very tight, in the order of 160lbft tight. It's only the friction that the tension in the spindle creates that stops the spindle moving out of alignment. The adjuster screws and bars play no meaningful part in holding things in place against the forces generated between the drive belt and the tyre contact point; they bend really easily.if the nut isn't tight enough.
I'll stand by my description of the correct way to do up the spindle as "effing tight, then tighten till you can get the pin through the castellations." The older you get the longer the wrench handle you will need. I am just about hanging off the wrench to loosen/tighten that castellated nut from below with mog on lift.
The light at the end of the tunnel is actually a train. 2019 M3W
|
|
|
|
|
Joined: Feb 2019
Posts: 1,876 Likes: 15
Talk Morgan Enthusiast
|
|
Talk Morgan Enthusiast
Joined: Feb 2019
Posts: 1,876 Likes: 15 |
How on earth does a brand new M3W leave the factory and the dealer with the belt loose enough to be moved down by 2 inches ???!! Quality control is put far behind in the order of priority. Money is heading the list with QC last on the list. That is how mine came as well, and I doubt the US dealer checked it
Rodger
2018 M3W "Dreamers on the Rise"
2004 Plus 8 (wife's)
old Goldwings and a couple of Harleys
|
|
|
|
|
Joined: Aug 2009
Posts: 557
Talk Morgan Regular
|
|
Talk Morgan Regular
Joined: Aug 2009
Posts: 557 |
How on earth does a brand new M3W leave the factory and the dealer with the belt loose enough to be moved down by 2 inches ???!! My brand new M3W had a severe pull to the right since brand new. After spending $500 for a local dealer to investigate and confirm, they filed a claim with Morgan, which never rendered any action or update. Finally fixed it with the Empire Suspension - the castor was off by 3.5 degrees. Go figure...
2016 M3W, Army Green Matte/Tan Leather, 17k miles
|
|
|
|
|
Joined: Jan 2021
Posts: 70
Just Getting Started
|
|
OP
Just Getting Started
Joined: Jan 2021
Posts: 70 |
Wow 😳 I long ago established that the amount of “passion”, “pride”, and “craftsmanship” car and bike makers proclaimed was inversely proportional to how well screwed together their products were 😅 British or Italian vs German for example. Anyway, car was picked up around noon and Oakmere (dealer) called me around 4 to say she was ready to be picked up. Naturally it’s set to be pouring it down all day tomorrow... ![[Linked Image]](https://i.ibb.co/rF2fC6X/00-E0-AACE-0874-4-F6-D-A6-EE-941488-C43168.jpg) And one of her not on a trailer... ![[Linked Image]](https://i.ibb.co/2y7kzWq/4703-E93-F-753-F-4063-A29-B-8-E389-F55-CF23.jpg)
Last edited by GregA10; 17/02/21 05:17 PM.
|
|
|
|
|
Joined: Aug 2009
Posts: 557
Talk Morgan Regular
|
|
Talk Morgan Regular
Joined: Aug 2009
Posts: 557 |
Looking fantastic, have fun and drive it everywhere!
2016 M3W, Army Green Matte/Tan Leather, 17k miles
|
|
|
|
|
