|
Forums34
Topics48,364
Posts813,336
Members9,215
| |
Most Online1,046
Aug 24th, 2023
|
|
|
There are no members with birthdays on this day. |
|
|
|
Joined: Aug 2013
Posts: 1,562
Talk Morgan Enthusiast
|
OP
Talk Morgan Enthusiast
Joined: Aug 2013
Posts: 1,562 |
|
|
|
|
|
Joined: May 2013
Posts: 881
Talk Morgan Regular
|
|
Talk Morgan Regular
Joined: May 2013
Posts: 881 |
Very much in the dog house, could be up for rehoming
|
|
|
|
|
Joined: Mar 2014
Posts: 1,673 Likes: 25
Talk Morgan Enthusiast
|
|
Talk Morgan Enthusiast
Joined: Mar 2014
Posts: 1,673 Likes: 25 |
They have become a lot less evil since I got myself a couple of these from eBay: ![[Linked Image]](https://www.tm-img.com/images/2021/05/26/Screenshot-2021-05-26-at-13.34.40.png) They are nicely made and I find them easier to use than the collection of nuts & washers that I used to use. The adjuster nut thread is coarser than the rivet thread which enables efficient & speedy tightening. ![[Linked Image]](https://www.tm-img.com/images/2021/05/26/Screenshot-2021-05-26-at-13.52.59.png) Not too expensive for a tool that will last a lifetime. Just search eBay for 'Engineers High Tensile Rivnut Setting Tool'.
Andy
|
|
|
|
|
Joined: Aug 2013
Posts: 1,562
Talk Morgan Enthusiast
|
|
OP
Talk Morgan Enthusiast
Joined: Aug 2013
Posts: 1,562 |
They have become a lot less evil since I got myself a couple of these from eBay: I agree they can be tamed into submission and play nice for a couple of uses , but will revert to type ( evil ) at the first opportunity. I wonder why they dont produce a closed end version that will keep the threads clean and not lock up? 
|
|
|
|
|
Joined: Feb 2019
Posts: 3,854 Likes: 2
Talk Morgan Addict
|
|
Talk Morgan Addict
Joined: Feb 2019
Posts: 3,854 Likes: 2 |
They have become a lot less evil since I got myself a couple of these from eBay: I agree they can be tamed into submission and play nice for a couple of uses , but will revert to type ( evil ) at the first opportunity. I wonder why they dont produce a closed end version that will keep the threads clean and not lock up? Dirt comes from both directions.
The light at the end of the tunnel is actually a train. 2019 M3W
|
|
|
|
|
Joined: Mar 2014
Posts: 1,673 Likes: 25
Talk Morgan Enthusiast
|
|
Talk Morgan Enthusiast
Joined: Mar 2014
Posts: 1,673 Likes: 25 |
I usually give them a squirt of Waxoyl and haven't really had a problem since I had to go round tightening them all up the first time.
Andy
|
|
|
|
|
Joined: Oct 2012
Posts: 2,776 Likes: 59
Talk Morgan Expert
|
|
Talk Morgan Expert
Joined: Oct 2012
Posts: 2,776 Likes: 59 |
Have been using them for about 30 years. Very rarely had any trouble with the ones I've fitted.
|
|
|
|
|
Joined: Apr 2008
Posts: 11,868 Likes: 138
Scruffy Oik Member of the Inner Circle
|
Scruffy Oik Member of the Inner Circle
Joined: Apr 2008
Posts: 11,868 Likes: 138 |
I've not had any problems with Rivnuts, I use a setting tool from Teng Tools, but I only tend to use them in low-stress applications. ![[Linked Image]](https://uktc.e2ecdn.uk/Products/ttnr81.jpg) It works very well with aluminium rivets (which are all I use) but I suspect a beefier setup might be needed if one wanted to use steel rivets in higher-load installations
Tim H.
1986 4/4 VVTi Sport, 2002 LR Defender, 2022 Mini Cooper SE
|
|
|
|
|
Joined: Nov 2015
Posts: 7,910 Likes: 242
Just barreling along Talk Morgan Guru
|
|
Just barreling along Talk Morgan Guru
Joined: Nov 2015
Posts: 7,910 Likes: 242 |
Would a tiny wipe of epoxy on the serrations help when fitting ?
Jon M
|
|
|
|
|
Joined: Mar 2011
Posts: 360 Likes: 8
Learner Plates Off!
|
|
Learner Plates Off!
Joined: Mar 2011
Posts: 360 Likes: 8 |
Or even the Morgan favoured variety of Loctite??!!
|
|
|
|
|
