7 members (CLPlusFour, Simon, TalkMorgan, Themorganeer, MJF, Jon G4LJW, Grumpy2),
311
guests, and
28
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums34
Topics48,343
Posts813,026
Members9,208
|
Most Online1,046 Aug 24th, 2023
|
|
|
Joined: May 2012
Posts: 358
Learner Plates Off!
|
OP
Learner Plates Off!
Joined: May 2012
Posts: 358 |
Thanks all. Its going to be a long weekend of checks.
92 Connaught Green Plus 4 Triumph Bonneville 865
|
|
|
|
Joined: Dec 2020
Posts: 212
L - Learner Plates On
|
L - Learner Plates On
Joined: Dec 2020
Posts: 212 |
My car had a strong fuel smell while driving and then it started to get the spray on windshield. If the smell is strong while engine is running, it is mostly likely tiny tiny cracks in the hoses. The rubber Morgan used was shiite. It eventually decomposes. Buy some decent fuel injection grade hose. Don't forget to check the hose that connects to the two towers under the fat hood. good luck.
end user
|
|
|
|
Joined: Feb 2019
Posts: 3,854 Likes: 2
Talk Morgan Addict
|
Talk Morgan Addict
Joined: Feb 2019
Posts: 3,854 Likes: 2 |
see if you can still get a fuel system from Morgan Custom before he runs out of stock.
The light at the end of the tunnel is actually a train. 2019 M3W
|
|
|
|
Joined: Aug 2019
Posts: 285 Likes: 3
Learner Plates Off!
|
Learner Plates Off!
Joined: Aug 2019
Posts: 285 Likes: 3 |
see if you can still get a fuel system from Morgan Custom before he runs out of stock.
I second this suggestion, I fitted one recently and it is a well made piece of kit that replaces the Morgan hoses around the cylinders, and separates the filter and pressure regulator, so that the filter is immediately downstream of the fuel pump and the regulator is up front with a gauge. The only catch is that you have to send off your fuel injector towers to Emil to change the fitting on them.
2020 M3W
|
|
|
|
Joined: Feb 2019
Posts: 3,854 Likes: 2
Talk Morgan Addict
|
Talk Morgan Addict
Joined: Feb 2019
Posts: 3,854 Likes: 2 |
see if you can still get a fuel system from Morgan Custom before he runs out of stock.
I second this suggestion, I fitted one recently and it is a well made piece of kit that replaces the Morgan hoses around the cylinders, and separates the filter and pressure regulator, so that the filter is immediately downstream of the fuel pump and the regulator is up front with a gauge. The only catch is that you have to send off your fuel injector towers to Emil to change the fitting on them. unless you purchase a pair of towers in advance and send those off. I did that and there was only a few hours of installation of down time.
The light at the end of the tunnel is actually a train. 2019 M3W
|
|
|
|
Joined: Dec 2017
Posts: 2,041 Likes: 71
Talk Morgan Expert
|
Talk Morgan Expert
Joined: Dec 2017
Posts: 2,041 Likes: 71 |
When I sent my towers to Emil for the new fittings the down time from removing to refitting was only 10 days, time for a few bacon butties.
Bruce 1964 4/4 Series V Comp (Megan) 1994 +8 (Maurice) 2013 M3W (Olga)
|
|
|
|
Joined: Dec 2020
Posts: 212
L - Learner Plates On
|
L - Learner Plates On
Joined: Dec 2020
Posts: 212 |
what Lightspeed says above! I could have saved myself some trouble of swapping hoses. But with Emil's system you have ton more reliability and can dial in fuel pressure with a regulator
end user
|
|
|
|
Joined: Sep 2019
Posts: 280 Likes: 19
Learner Plates Off!
|
Learner Plates Off!
Joined: Sep 2019
Posts: 280 Likes: 19 |
see if you can still get a fuel system from Morgan Custom before he runs out of stock.
Or just get the uprated fuel kit from M3Wservices in Swindon - still uses new 'standard' correct type fuel pipe but also has a proper fuel filter and regulator. Lot cheaper and works well. That is of course if you need it as I still think its more likely an oil leak/wet sumping - have you carried out your checks yet?
|
|
|
|
Joined: Feb 2019
Posts: 3,854 Likes: 2
Talk Morgan Addict
|
Talk Morgan Addict
Joined: Feb 2019
Posts: 3,854 Likes: 2 |
The standard towers can have their copper fuel fitting come loose in the tower since it is only a press fit.
The light at the end of the tunnel is actually a train. 2019 M3W
|
|
|
|
Joined: May 2012
Posts: 358
Learner Plates Off!
|
OP
Learner Plates Off!
Joined: May 2012
Posts: 358 |
see if you can still get a fuel system from Morgan Custom before he runs out of stock.
Or just get the uprated fuel kit from M3Wservices in Swindon - still uses new 'standard' correct type fuel pipe but also has a proper fuel filter and regulator. Lot cheaper and works well. That is of course if you need it as I still think its more likely an oil leak/wet sumping - have you carried out your checks yet? I've had a good look over the car without beginning to take it apart too much and can't find anything obvious. Rather than cause a new issue myself I'm dropping it off with the experts on tuesday for a proper diagnosis.
92 Connaught Green Plus 4 Triumph Bonneville 865
|
|
|
|
|