|
|
|
Forums34
Topics48,364
Posts813,343
Members9,215
| |
Most Online1,046
Aug 24th, 2023
|
|
|
There are no members with birthdays on this day. |
|
|
|
Joined: Mar 2014
Posts: 1,673 Likes: 25
Talk Morgan Enthusiast
|
Talk Morgan Enthusiast
Joined: Mar 2014
Posts: 1,673 Likes: 25 |
If you're careful about where you drill the holes for the rivnuts, you should be drilling through two layers of aluminium which provides for a solid mounting. I also used 3mm self-adhesive neoprene on the back of the rectifier to protect the paintwork.
Andy
|
|
|
|
|
Joined: Feb 2019
Posts: 3,854 Likes: 2
Talk Morgan Addict
|
|
Talk Morgan Addict
Joined: Feb 2019
Posts: 3,854 Likes: 2 |
"Did you make a mounting/backing plate to be located behind the body panel inside the footwell forward of the pedal assembly?"
I used a fabricated nut plate on the inside for my install, but I like Bunny's rivnut idea as well. Thank you Steve and Bunny for the info I will probably relocate it. I have the HD Rectifier installed and made darn sure it was grounded thoroughly. Good suggestions guys.
The light at the end of the tunnel is actually a train. 2019 M3W
|
|
|
|
|
|
|
