Here is my fitting of Mark's phone mount.
![[Linked Image]](https://www.tm-img.com/images/2024/03/03/DSC_1159.jpeg)
The plastic used to print these is now a bit more of a grey colour than black. I chose to soften the crisp edges and corners of the clip, to minimise the chance of marking the leather - and I now don't need to use the soft fabric strip that is supplied by Mark for that purpose. I carefully pared and scraped the edges with a craft knife, then rubbed it all down quite hard with medium wet-and-dry, done wet. This process also results in slightly lightening the shade of grey and as you can see from the photos it actually closely matches the grey leather of my +4, which is a good outcome for me.
The clip fits fairly tightly onto the dash-top roll and, with a carefully drilled hole to marry up with the peg, it is pretty solid. I'm using an iBolt miniPro phone holder, which has a 17mm ball mount to match what comes with the mounting clip.
https://www.amazon.co.uk/dp/B00KMYVCX8?psc=1&ref=ppx_yo2ov_dt_b_product_details ![[Linked Image]](https://www.tm-img.com/images/2024/03/03/DSC_1161.jpeg)
I think it is a good product that works very well for me.
Many thanks to Mark for making and supplying it.
