|
7 members (david nathan, Graham, G4FUJ, BobtheTrain, Gordon D, sewin, Rex_tulips, Elliot),
275
guests, and
42
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
SORN
by OldSkrote - 31/07/25 02:07 PM
|
New
by Rex_tulips - 30/07/25 07:59 PM
|
|
|
|
|
|
|
Forums34
Topics48,367
Posts813,392
Members9,215
|
Most Online1,046 Aug 24th, 2023
|
|
|
Joined: Sep 2019
Posts: 284 Likes: 21
Learner Plates Off!
|
Learner Plates Off!
Joined: Sep 2019
Posts: 284 Likes: 21 |
Steve,
I have to admit I have not looked at the nuts since it came back from you. I presume you replaced the nuts that were previously there, which from memory were 1/2" AF cadmium plated nuts, which when I changed the exhaust to a G56, were a nightmare to undo and do up. It was just one of the things I thought I should look at, when I get it out of storage, as there is an exhaust rattle and I was going to do an end to end on the "pipes" but it is probably the heat shields. The metallastic bobbins could also probably do with replacing but I have spares of those. I think in AF sockets I only have 1/2" and 3/8" drive in France, so I will take a deep 3/8AF 1/4" drive socket out with me. I do have a large 1/4" drive metric set with various extensions and both powered and unpowered ratchets.
Wilson The 3/8th drive will work just but you will need a long extension bar at the least.
Last edited by Stevo666; 26/04/25 08:23 PM. Reason: Grammar
|
1 member likes this:
WilsonLaidlaw |
|
|
|
|
|