|
6 members (jejemek, Graham, G4FUJ, Montegue, Pittsartist, Image, James B W),
212
guests, and
64
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
|
|
|
|
|
|
|
|
tow bar
by G Walker - 24/08/26 06:52 PM
|
|
|
Forums39
Topics49,836
Posts837,271
Members9,596
| |
Most Online1,063
Jun 14th, 2026
|
|
|
|
Joined: May 2014
Posts: 5,437 Likes: 131
Black Rat Charter Member
|
Black Rat Charter Member
Joined: May 2014
Posts: 5,437 Likes: 131 |
I put the wheels back on, got her back on the ground, filled the tank with fresh fuel and went to the grocery store. Life is good! It's been a long road, now you need to find a long long road. Enjoy.
Keith
2013 narrow bodied + 4 Ruby.
|
|
1 member likes this:
Luddite |
|
|
|
|
Joined: Jul 2022
Posts: 460 Likes: 80
Learner Plates Off!
|
|
OP
Learner Plates Off!
Joined: Jul 2022
Posts: 460 Likes: 80 |
I put the wheels back on, got her back on the ground, filled the tank with fresh fuel and went to the grocery store. Life is good! It's been a long road, now you need to find a long long road. Enjoy. Thank you! I missed the sunny, nearly 80° weather here a couple of weeks ago, but I'm hoping to get out tomorrow. It's predicted to be in the 60° range...
|
|
|
|
|
Joined: Jan 2023
Posts: 1,013 Likes: 119
Has a lot to Say!
|
|
Has a lot to Say!
Joined: Jan 2023
Posts: 1,013 Likes: 119 |
Thanks cooper man, very much appreciated and I really like your added support bracket method. especially the triangular examples!
Martin.
|
|
1 member likes this:
CooperMan |
|
|
|
|
Joined: Aug 2019
Posts: 791 Likes: 143
Talk Morgan Regular
|
|
Talk Morgan Regular
Joined: Aug 2019
Posts: 791 Likes: 143 |
Following a recent engine oil and filter change, the bonnet was opened to check for any leaks. On reclosing the bonnet, the nearside rear catch knob literally came off in my hand! Don’t know if the bonnet knobs are OE or aftermarket items but the catches have never required gorilla strength to release, so this came as a surprise. The threaded extension to the catch knob had sheared off at the outer face of the sliding plate and the inner portion of the thread with hex nut remained in the sliding plate. Access to release the catch from inside the bonnet looked to be challenging. The adopted solution below. ![[Linked Image]](https://www.tm-img.com/images/2026/04/24/5.jpg) The threaded portion remaining inside the sliding plate was drilled out from the outside and ultimately fell to the running board, complete with nut. The thread was confirmed as M6. ![[Linked Image]](https://www.tm-img.com/images/2026/04/24/2.jpg) The knob was drilled to 12mm depth, starting at 2.5mm dia and working incrementally up to 5mm dia. The swarf revealed the material to be brass. ![[Linked Image]](https://www.tm-img.com/images/2026/04/24/3.jpg) An M6 thread was then cut to full depth. ![[Linked Image]](https://www.tm-img.com/images/2026/04/24/4.jpg) A 25mm length of stainless M6 threadbar was screwed into the newly cut hole, sealed with threadlocker and tightened. ![[Linked Image]](https://www.tm-img.com/images/2026/04/24/6.jpg) This assembly was then screwed into the sliding plate to enable the bonnet catch to be released. A washer and stainless nyloc nut clamp the knob to the sliding plate, thus making a connection somewhat stronger than the previous arrangement. Job done. Now that one has failed, more are likely to follow. A winter task will be to strengthen the remaining knobs in like manner.
Chris
2015 Plus 4 Silverlake Blue
(2014 3.7 Roadster Crystal Blue)
(2012 4/4 Sport Black)
|
|
4 members like this:
1854sailor, RichardV6, +8Rich, Graham, G4FUJ |
|
|
|
|
Joined: Jul 2007
Posts: 27,802 Likes: 749
Member of the Inner Circle
|
|
Member of the Inner Circle
Joined: Jul 2007
Posts: 27,802 Likes: 749 |
JohnV6
2022 CX Plus Four
2025 Renault Scenic Alpine etech "Yvette"
|
|
|
|
|
Joined: Nov 2015
Posts: 8,663 Likes: 489
Just barreling along Needs to Get Out More!
|
|
Just barreling along Needs to Get Out More!
Joined: Nov 2015
Posts: 8,663 Likes: 489 |
Good solution Chris 
Jon M
|
|
|
|
|
Joined: Feb 2016
Posts: 8,656 Likes: 407
Needs to Get Out More!
|
|
Needs to Get Out More!
Joined: Feb 2016
Posts: 8,656 Likes: 407 |
Great job Chris . I was surprised the remaining stub couldn't have been removed by turning original locknut. Is the sliding catch plate threaded itself or just 6mm clearance  Photo below taken whilst making my bonnet stays shows reasonable access to catch release locknut. ![[Linked Image]](https://i.ibb.co/jvdYy54f/IMG-20200208-143007.jpg)
Richard
2018 Roadster 3.7
1966 Land Rover S2a 88
2024 Royal Enfield Guerrilla 450
1945 Guzzi Airone
|
|
|
|
|
Joined: Aug 2019
Posts: 791 Likes: 143
Talk Morgan Regular
|
|
Talk Morgan Regular
Joined: Aug 2019
Posts: 791 Likes: 143 |
The sliding plate was threaded. Access to the locknut somewhat fraught when the bonnet is closed 
Chris
2015 Plus 4 Silverlake Blue
(2014 3.7 Roadster Crystal Blue)
(2012 4/4 Sport Black)
|
|
|
|
|
Joined: Feb 2016
Posts: 8,656 Likes: 407
Needs to Get Out More!
|
|
Needs to Get Out More!
Joined: Feb 2016
Posts: 8,656 Likes: 407 |
Are yes  forgot about that  . Good to know sliding catch is threaded though
Richard
2018 Roadster 3.7
1966 Land Rover S2a 88
2024 Royal Enfield Guerrilla 450
1945 Guzzi Airone
|
|
|
|
|
Joined: Nov 2018
Posts: 6,666 Likes: 433
Talk Morgan Sage
|
|
Talk Morgan Sage
Joined: Nov 2018
Posts: 6,666 Likes: 433 |
Just for info, the older Mogs have a 1/4 BSF thread on the bonnet knobs, just to be really awkward!
"Y mae dafad ddu ym mhob praidd"
1972 4/4, 1981 MGBGT, 1984 FLHT1340, 1980 XLH1000, 1990 ZX10
|
|
|
|
|
