I had been asked about my oil cooler installation. I still had a temperature activated filter bypass from a Harley cooler on my wife's heritage softail (I replaced that set up with a JAGG fan assisted cooler. I like the fact it is temp activated because I really do not want cold oil being pumped out to a cooler. The cooler is from Ultracool.
So my first thought was to fabricate a couple of "L" brackets and hang off the cross tube under the engine.
When I got this together I realized.... BAD IDEA

Last edited by rcmatt; 20/02/19 01:41 PM.
Rodger
2018 M3W "Dreamers on the Rise"
2004 Plus 8 (wife's)
old Goldwings and a couple of Harleys