Originally Posted By Chris99


Stuck throttle - fuel pump and starter work but no spark


at the moment that's my default behaviour ;-) also without stucking the throttle ...

Originally Posted By Chris99

Inertia cutout - no fuel pump but starter works


Fuel pump is working anytime (after ingnition on). What I'm wondering: starter sometimes works without deactivating the immobilizer via Dongle , sometimes not ...

Originally Posted By Chris99

Imobiliser active - no fuelpump or starter.


there is a bunch of cables from/to the immobilizer, i'm afraid they are cutting more than only pump and starter .. ?

I will measure this tomorrow, using the wiring plan this is now possible.

Originally Posted By Chris99

If you've reset the throttle position I'd check what the default initial value should be, or maybe try it at 0%?


Verified that today. The throttle position displayed in ProTune is 10%, 0,31V , exactly the values I'd seen before , where the engine was runnig properly . So that seems not to be the problem.

Originally Posted By Chris99

If this fails you may be looking at an ECU or indicator module problem.


The ECU is 'talking' with proTune and shows no faults, what is the indicator module ??

Thanks for your help !