Originally Posted by Peter J
The Chips Away man quitted £180 to blend the paint in and clear coat the panel, including removing the rear light unit and reflector.
MG Cannon want £600 to do essentially the same thing.
Can't decide which to use. The difference is significant.
I'm tempted to use the Chips Away guy and if the job isn't goo get Cannon to re-do it.


Peter,as you are probably aware,Chipsaway is a franchise so only as good as the guy doing the work.

I would check with other customers to make sure you are getting a good 'un innocent

That said, they can and do do some amazing smart repairs.I don't know if it is still the case, but they used to used a fairly thin lacquer (PC52) to blend the repair onto existing lacquer.

This was not a two pack and was prone to dulling over time and could also be affected by e.g. petrol which could dissolve it!

This was a few years back before they went to water based so it may have changed confused2

Most body shops, if doing a part repair, use an agent to 'melt' the edges of the existing lacquer slightly and allow the new , two pack lacquer to blend in.

James


Aero8 , Series 1 - Boston Green
RR Evoque P300E Autobiography
Smart Brabus Convertible
Monkey Z125