Originally Posted by Montegue

Hi all,

To compliment Monty's new exhaust system I'm currently planning out with Fusion Fabrications:

https://www.fusionfabs.co.uk/

I'm looking for feedback from anyone running the Wolf Performance 2.0 Duratec Map as described here:

https://www.wolfperformance.co.uk/engine-remapping/

I'm keen to understand how polished the fueling, idle quality and drivability is with this calibration?

Given Monty is used on the road these elements are critical to me.

Thanks, Dave.


Hi Dave,

I have the Wolf re-map on my 2013 +4 together with a K&N cone filter fitted by Cain. The car has a Morgan sports silencer. It now puts out 143 bhp at the rear wheels compared with the previous 147 bhp at the flywheel so it has almost done away with the average 20% loss between flywheel and rear wheels. It comes "on cam" at around 3k revs and revs to 6,500 revs. 0 to 60 mph is about 6.5 secs. MPG is 42 mpg, idle is unchanged drivability is largely unchanged once you get used to the more immediate response. i.e. less throttle required to pull away.

Hope this helps.

Keith
2013 narrow bodied + 4 Ruby.