65 miles on the clock and I totally remember why I did this in the first place! A few little tiny flaws, the seat heater switches are cross-wired one of the high beams isn't working one of the headlight buckets is misaligned the black header wrap has already mostly turned white, other than that it's just a ball!
You will shortly be enjoying? the orchestration of the bevel box as it wears in
Richard
2018 Roadster 3.7 1966 Land Rover S2a 88 2024 Royal Enfield Guerrilla 450 1945 Guzzi Airone
There's been a thread about the seat bottoms, if you get them in it will wear the leather, needs a piece of wood screwing to the bottom of the seat just where it will touch the cross member, it may just lift seat a little depending on the size of the wood. Happy motoring, you deserve it.
Not my way. If the connector is under the seat bottom st all, the bottom won't fit in at all. Lift the seat bottom out, make sure the connector remains out, and push the seat bottom in and rearward. THEN push the connector in between the side of the seat bottom and the tunnel. Viola!
The car looks fantastic. Very elegant, in fact I think it is more Rolls Royce like with the added accoutrements and striping aka the Phantom or Silver Ghost?
Not my way. If the connector is under the seat bottom st all, the bottom won't fit in at all. Lift the seat bottom out, make sure the connector remains out, and push the seat bottom in and rearward. THEN push the connector in between the side of the seat bottom and the tunnel. Viola!
I doubt any of the sounds I alluded to could be attributed to a Viola
Richard
2018 Roadster 3.7 1966 Land Rover S2a 88 2024 Royal Enfield Guerrilla 450 1945 Guzzi Airone
There's been a thread about the seat bottoms, if you get them in it will wear the leather, needs a piece of wood screwing to the bottom of the seat just where it will touch the cross member, it may just lift seat a little depending on the size of the wood. Happy motoring, you deserve it.
Brilliant and DONE!
Not my way. If the connector is under the seat bottom st all, the bottom won't fit in at all. Lift the seat bottom out, make sure the connector remains out, and push the seat bottom in and rearward. THEN push the connector in between the side of the seat bottom and the tunnel. Viola!
kirkusblog.com 2016 M3W John A Prestwich Special 1952 Ford 8N 1968 Honda CL175,and 2018 Ural Retro
keep you amused.