|
|
|
|
|
|
|
|
|
|
|
|
|
|
tow bar
by G Walker - 24/08/26 06:52 PM
|
|
|
Forums39
Topics49,838
Posts837,293
Members9,596
| |
Most Online1,063
Jun 14th, 2026
|
|
|
There are no members with birthdays on this day. |
|
|
|
Joined: Sep 2015
Posts: 15
New to Talk Morgan
|
OP
New to Talk Morgan
Joined: Sep 2015
Posts: 15 |
Can someone please tell me how the heater element is mounted in the square box on my 1989 4/4. Is it just pressed into the box ? I need to repair my heater for comming cold Swedish spring.
|
|
|
|
|
Joined: Apr 2009
Posts: 1,036
Has a lot to Say!
|
|
Has a lot to Say!
Joined: Apr 2009
Posts: 1,036 |
The heater element sits on the bulkhead with sealant to prevent water ingress and the plenum (box) sits over it and is screwed to the bulkhead. I trust that this helps.
Last edited by Cheshire_David; 06/12/17 04:41 PM. Reason: Correction due to stupid predictive text.
|
|
|
|
|
Joined: Sep 2015
Posts: 15
New to Talk Morgan
|
|
OP
New to Talk Morgan
Joined: Sep 2015
Posts: 15 |
Thank you ! I will go on to sort out a small leakage from the plenum. I can't see any moisture on the element.
|
|
|
|
|
Joined: Sep 2015
Posts: 15
New to Talk Morgan
|
|
OP
New to Talk Morgan
Joined: Sep 2015
Posts: 15 |
I'm sorry I need more help. I need to take out the heater matrix from the plenum. I can't understand hos it's mounted. I has opened the plenum gable,is the matrix just pressed in place ? Appreciate your help !
|
|
|
|
|
Joined: Apr 2008
Posts: 12,256 Likes: 317
Scruffy Oik Member of the Inner Circle
|
Scruffy Oik Member of the Inner Circle
Joined: Apr 2008
Posts: 12,256 Likes: 317 |
You should be able to unbolt the heater box and remove it so that you can get to the heater matrix. There are a two bolts either side that hold the box down onto the top of the bulkhead. If you remove these you can lift the box off the heater matrix.
As David says, the matrix is stuck to the bulkhead with sealant.
Tim H.
1986 4/4 VVTi Sport, 2002 LR Defender, 2022 Mini Cooper SE
|
|
|
|
|
|
|
