|
Forums34
Topics48,346
Posts813,054
Members9,208
| |
Most Online1,046
Aug 24th, 2023
|
|
|
|
Joined: Mar 2017
Posts: 2,222 Likes: 20
Talk Morgan Expert
|
OP
Talk Morgan Expert
Joined: Mar 2017
Posts: 2,222 Likes: 20 |
If anyone is experiencing a stiff rotary heater control knob, mine has been really hard to turn lately on my 2016. 4/4 Sport. So stiff had to use two hands before setting off today. So this afternoon on my return, I decided to drop the under tray and dashboard to see what’s going on. I could see the bolt going through the two plates controlling the heater control knob was quite tight. I loosened the locking nut right off and sprayed WD40 silicone until it worked free again, applied a little grease and tightened back up, but not so tight this time. job done. So if anyone else has the same problem turning the heater it’s any easy fix if I can do it. ![[Linked Image]](https://tm-img.com/images/2023/01/15/BAAC83AD-69B5-4873-A6DD-FFAB67E1890B.jpeg) ![[Linked Image]](https://tm-img.com/images/2023/01/15/9DD08FCC-6AB5-4D23-ADD1-551A5472B72B.jpeg)
Craig Jezz
|
|
|
|
|
Joined: Mar 2017
Posts: 1,611 Likes: 1
Talk Morgan Enthusiast
|
|
Talk Morgan Enthusiast
Joined: Mar 2017
Posts: 1,611 Likes: 1 |
SFG
2012 4/4 Sport
|
|
|
|
|
Joined: Apr 2019
Posts: 895
Talk Morgan Regular
|
|
Talk Morgan Regular
Joined: Apr 2019
Posts: 895 |
Thanks Craig. I will have a look at mine when the weather gets a bit better!
Rob
4/4 Sport Grey
|
|
|
|
|
Joined: Feb 2016
Posts: 7,923 Likes: 217
Talk Morgan Guru
|
Talk Morgan Guru
Joined: Feb 2016
Posts: 7,923 Likes: 217 |
Good fix Craig  Just be aware that loosening the pivot bolt may allow the detent ball to escape as that is sandwiched between the two plates. This assumes there is a detent there in the first place. My car has never had one.
Richard
2018 Roadster 3.7
1966 Land Rover S2a 88
2024 Royal Enfield Guerrilla 450
1945 Guzzi Airone
|
|
|
|
|
Joined: Mar 2017
Posts: 2,222 Likes: 20
Talk Morgan Expert
|
|
OP
Talk Morgan Expert
Joined: Mar 2017
Posts: 2,222 Likes: 20 |
Good fix Craig Just be aware that loosening the pivot bolt may allow the detent ball to escape as that is sandwiched between the two plates. This assumes there is a detent there in the first place. My car has never had one. Thanks for that information Richard, i wasn't aware of that.
Craig Jezz
|
|
|
|
|
Joined: Mar 2022
Posts: 81 Likes: 1
Just Getting Started
|
|
Just Getting Started
Joined: Mar 2022
Posts: 81 Likes: 1 |
Kevin Davies
|
|
|
|
|
Joined: Dec 2008
Posts: 21,868 Likes: 167
Roadster Guru Member of the Inner Circle
|
|
Roadster Guru Member of the Inner Circle
Joined: Dec 2008
Posts: 21,868 Likes: 167 |
Question for Craig. In the first picture, there is a black wire leading down into a long slot shielded by a metal cover. What is this?
I'm asking because my GDI has the slot cut in the panel, but no wire or metal cover.
DaveW
'05 Red Roadster S1
'16 Yellow (Not the only) Narrow AR GDI Plus 4
|
|
|
|
|
Joined: Mar 2017
Posts: 2,222 Likes: 20
Talk Morgan Expert
|
|
OP
Talk Morgan Expert
Joined: Mar 2017
Posts: 2,222 Likes: 20 |
Question for Craig. In the first picture, there is a black wire leading down into a long slot shielded by a metal cover. What is this?
I'm asking because my GDI has the slot cut in the panel, but no wire or metal cover. Hi Dave, the wire goes to the LED foot-well lighting.
Craig Jezz
|
|
|
|
|
Joined: Dec 2008
Posts: 21,868 Likes: 167
Roadster Guru Member of the Inner Circle
|
|
Roadster Guru Member of the Inner Circle
Joined: Dec 2008
Posts: 21,868 Likes: 167 |
Ahhhhh! Thanks.
DaveW
'05 Red Roadster S1
'16 Yellow (Not the only) Narrow AR GDI Plus 4
|
|
|
|
|
Joined: Oct 2008
Posts: 2,054 Likes: 18
Talk Morgan Expert
|
|
Talk Morgan Expert
Joined: Oct 2008
Posts: 2,054 Likes: 18 |
Ahhhhh! Thanks. You mean you don't have footwell lighting, Dave?? 
Regards
Alan
AP08 MOG
2016 Plus 4 GDi - Mazda Soul Red Metallic
|
|
|
|
|
