Originally Posted by CLPlusFour
Originally Posted by bmgermany


Your solution looks very nice.

Personally, I am always afraid that aluminium loaded with weight will break due to vibrations.


I have only good experiences with aluminum, even with additional weight, on a Harley. And a Dyna without balance shaft has viberationen without end

The weight of the mainly plastic horns is minimal and the cantilever bracket at 6mm thickness provides a strong support. Been fitted for 3 years including numerous high vibration/rpm track days without issue. Loctite thread locker was used on the horn support screws.

Chris

2015 Plus 4 Silverlake Blue
(2014 3.7 Roadster Crystal Blue)
(2012 4/4 Sport Black)