PDI at the factory isnt up to standard at all..i felt the car on braking takes to the right,just did bleeding to the front brakes,the left side had air,now the brake pedal is firmer..easy steps,have someone push the brake pedal a couple of times hard,then keep their foot down & someone opens the brake nipple on the caliper,do each side 3 times,the brake pedel will get firm.
-when i change gears i feel from each gear to another its hard to get into another gear, as if you arent full on the clutch,just remove the cover on top of the pedals,wrench #8...they are 5 bolts,then unlose the nut on the clutch pedal beam,tturn the beam inwards if you need more clutch..did it,now changing gears is so much better,easier,70% better,and i tried speeding,the clutch wasnt slipping i didnt over adjust it,these few things should be done by PDI before the custmer gets it!as the car is all a kit put together,they should adjust things better
