Some late info….
Should any other owner wish to use this bespoke connector in the future, the download links for the 3D print files are below.
![[Linked Image]](https://tm-img.com/images/2024/02/22/printed-connect.jpg)
The printed components have pilot fixing holes, intended to be drilled out/tapped M2.5
Just to refresh, it mates with the (dashboard sub harness) connector that would have originally plugged into the PCB’s 15 way header, here.
![[Linked Image]](https://tm-img.com/images/2024/02/22/dash-sub-harn-con.jpg)
Top cover
download link![[Linked Image]](https://tm-img.com/images/2024/02/22/b1.jpg)
Bottom cover
download link![[Linked Image]](https://tm-img.com/images/2024/02/22/b2.jpg)
