Finally after two and a half months, my replacement chassis turned up in France but that is all, just the chassis and not all the additional bits necessary to changeover the car from a Mk.1 to a Mk.2 chassis. It took so long to get to France, I assume Morgan must have sent it by donkey cart. Just for two examples of missing parts: The bevel box mounts and the alternator regulator bracket and mounts. Apparently Morgan now expect these to be ordered separately. ONLY MORGAN! This is going to cause yet further delay on my car, which I have now been without since the beginning of May. I am dealing with the PR department at Malvern now, as apparently the only folk who have anything approaching a sense of urgency. Morgan have now asked for a list with part numbers, of any additional pieces required. Surely they should know and have a standard list of every piece required to complete the changeover. These should be included, as a complete kit, with the replacement chassis, as a matter of course and having to order them separately is a total nonsense. Until you have done one changeover, you are unlikely to know all the parts that may be required. Morgan must know themselves.
