Originally Posted by CooperMan
Originally Posted by Arwyn Williams
Mocked up the tailpipe today for the Plus 4 today out of a pair of 75 degree bends and a length of 1 3/4 ERW tubing.

Not the final version though as I'm taking the mocked up pipe to a pipe bender to have one bent up in 304 grade stainless.

Didn't manage to machine the three wheeler gearbox today...its sitting there all set up on the bed of the milling machine

Arwyn


Will be interesting to hear what you modify in the MTW 'box, mine acts like a total loss lube system frown


Basically a blind end bush in the constant mesh pinion and rubber O rings and shouldered spacers in the gearbox lug acting on the selector rods.

Also improving the oil supply to the trunnion bearings by machining out the trunnion plates

Arwyn