Removed the pedal assembly on my Roadster in its entirety. This to upgrade linkages. Rose joints available not compact enough so have ordered a pair of M8 marine grade stainless clevis pin sets. The OE pressed steel ones differ slightly for brake and clutch to accomodate operating rods. The brake one is 10mm and clutch 8mm diam but the former reduces to the same M8 thread.

Will bore out clevis pin holes to accomodate larger OE 3/8" pin for clutch and 7/16" for brake, with replacement pins in stainless. The bare metal pedals will be painted with black Hammerite with new brake return spring and full set of stainless fixings to complete. Pics to follow.


Richard

2018 Roadster 3.7
1966 Land Rover S2a 88
2024 Royal Enfield Guerrilla 450
1945 Guzzi Airone