Originally Posted by Steve +8
[/quote]

Hi, check the clearance at the top with the hood up, you may have to bend the wiper arm slightly to make sure it doesn't catch. I was embarrassed when I took mine to Ledgerwood because the wipers didn't work and it turned out they were just catching on the hood frame. frown


That's good advice, when I fitted mine I tested them with the hood down and they were great, first time I used them in anger with the hood up one of the wipers jammed on the hood frame and blew the fuse. Had to drive all the way back from Goodwood with no wipers gloomy
[/quote]

Thank you for this top tip. I checked again. Works fine with the 7" (18cm) length. Part Nr. WDS126A
[Linked Image]wiperslength by Werni Wehrli, auf Flickr

Plus 4 110 Edition 2019