I've been told to not go over 34°. And with what I've got I won't go over 6600 RPM. I have the limiter set at 6300 for a margin of safety.

I'll compare your curve with mine. I think for the most part they are pretty similar.

I can feel a slight movement in the shaft. I've tried spraying it with carburator cleaner while it's running and haven't heard any changes is idle, so I guess it's ok.

I'm not going to 40's. It should run fine with what it's got

Last edited by PaulyG; 03/08/24 01:10 PM.
Paul

73 4/4 "Henry A"
53 +4 Flat Rad "Pug"
84 Citoen 2CV Spec "BeBe"
60 MGA
https://morgan34.org/