Originally Posted by Leroy
Not sure I'm gonna go down the lines of drilling holes just yet. Gonna solve the water getting in first. Was surprised to see a decent amount of water come out from the black mounting spacer. Think water has been coming in from the hole where the electrical feed goes through. All dried and greased so need to figure out some kind of gaiter to stop further water coming in.


We speak about two 3mm holes in an area you can‘t see. It‘s safe that water comes in. So drain it.

The holes are also a point at a workshop meeting at a wellknown Morgan Dealer.

If you buy new lamps you‘ve got also new lenses. So have a try with the holes in the old lenses. My Mog has done about 30.000KM with holes and without any problems by the holes.

In cause I‘m too silly to post pictures I can send you pictures by mail.

Greets René

Last edited by xc68anc; 04/03/23 04:28 PM.

2018 plus4 (sports green)
with a homemade really shiny red tinted dash…