This weekend we are doing a trip around the countryside. I had heard a slight squeak in the front end the other day. I pulled the hubs on both sides and inspected everything. I didn't have new seals, so I only repacked the small bearings, but everything looked fine. I put it back together and adjusted the crown nuts. Re-greased the sliding pillars. And greased the rear axles.

On the test drive, no more squeak. Now we just have to watch the weather. There's a Nor'easter heading our way. Hoping it stays to the south.

Paul

73 4/4 "Henry A"
53 +4 Flat Rad "Pug"
84 Citoen 2CV Spec "BeBe"
60 MGA
https://morgan34.org/