Not yet today.
Waiting for some rain!
I have tried using some seam sealer on the hood and want to test it.
Drove back from Bicester after the TM meet and decided I REALLY need to sort the drips on my head and the damp areas spreading from seams.
Using McNett urethane based sealer and painted onto seams with a small brush. Used a hairdrier to dry it quickly and it is a clear finish.
The hood stretches tight when the swivel levers are applied and the seamsand stitching stretch. The holes the thread go through open up enough to just see daylight! I hope that I managed to get the sealer to penetrate enough to seal them.

Plus Four MY23 Furka Rouge